Table of Contents
Advertisement
show cable qos permission
show cable qos permission
To display the status of permissions for changing quality-of-service (QoS) tables on a Cisco CMTS, use
the show cable qos permission command in privileged EXEC mode.
Syntax Description
This command has no keywords or arguments.
Command Modes
Privileged EXEC
Command History
Release
12.1 T
12.1(4)CX
Examples
The following example displays the output of the show cable qos permission command:
CMTS01# show cable qos permission
Create by SNMP
yes
Table 3-39
Table 3-39 show cable qos permission Command Field Descriptions
Field
Create by SNMP
Update by SNMP
Create by modems
Tip
In Cisco IOS Release 12.1(12)EC, Release 12.2(8)BC1, and later releases, you can add a timestamp to
show commands using the exec prompt timestamp command in line configuration mode.
Cisco Broadband Cable Command Reference Guide
3-146
show cable qos permission
Modification
This command was introduced.
This command was deprecated for DOCSIS 1.1 use, because DOCSIS 1.1
replaces the QoS profile model with a service flow model. The
interface cable qos paramset
Update by SNMP
yes
describes the fields displayed by the show cable qos permission command.
command is used for DOCSIS 1.1 operation.
Create by modems
yes
Description
Indicates permission setting for creation of QoS table entries by the
Simple Network Management Protocol (SNMP).
Indicates permission setting for creation of QoS table entries by
modem registration requests.
Indicates permission setting for dynamic updating of QoS table
entries by the SNMP.
Chapter 3
Cisco CMTS Show Commands
show
OL-1581-08
Advertisement
Table of Contents
