Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
show interface cable
To display the current configuration and status of a cable interface, use the show interface cable
command in privileged EXEC mode.
Syntax Description
slot/port
slot/subslot/port
options
OL-1581-08
show interface cable {slot/port | slot/subslot/port} [options]
Identifies the cable interface and downstream port on the
Cisco uBR7100 series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On
the Cisco uBR7200 series router, slot can range from 3 to 6, and port
can be 0 or 1, depending on the cable interface.
Identifies the cable interface on the Cisco uBR10012 router. The
following are the valid values:
•
slot = 5 to 8
subslot = 0 or 1
•
port = 0 to 4 (depending on the cable interface)
•
Cable-specific options are documented in their own command
reference pages:
show interface cable downstream, page 3-209
•
show interface cable intercept, page 3-212
•
show interface cable mac-scheduler, page 3-214
•
show interface cable monitor, page 3-222
•
•
show interface cable qos paramset, page 3-226
show interface cable service-flow, page 3-228
•
show interface cable sid, page 3-234
•
show interface cable signal-quality, page 3-241
•
show interface cable upstream, page 3-243
•
A number of non-cable-specific options are also supported (but not all
are meaningful for cable interfaces):
accounting—Displays the number of packets of each protocol
type that was sent through the interface.
crb—Displays routing and bridging information.
description—Displays the description entered for the interface.
fair-queue—Displays distributed weighted fair queuing (DWFQ)
statistics.
irb—Displays integrated routing bridge information.
mac-accounting—Displays Ethernet MAC accounting
information.
random-detect—Displays weighted random early detection
(WRED) information.
rate-limit—Displays rate-limit information.
shape—Displays Traffic Shape information.
stats—Displays numbers of packets that were switched.
Cisco Broadband Cable Command Reference Guide
show interface cable
3-203
Advertisement
Table of Contents
