Cisco SR2016T-NA Reference Manual page 694

show hccp
Non Critical config
===================
int Cable6/0/0
!
no ip address
no keepalive
cable bundle 1
end
Member 5 standby
target ip address: protect 222.1.1.9, working 222.1.1.9
channel-switch "uc" (wavecom-hd, 1.10.45.11/7, 1.10.45.11/4) enabled
channel-switch "rfsw" (rfswitch-group, 1.10.52.33/0x40100000/8) enabled
tran #: SYNC 0, last SYNC_ACK 9
hold timer expires in 00:00:13.756
Interface Generic Critical Config
========================
int Cable6/0/0
mac-address 00e0.6666.1270
end
CMTS interface critical config
==============================
int Cable6/0/0
cable bundle 1 master
cable downstream annex B
cable downstream modulation 64qam
cable downstream interleave-depth 32
cable downstream frequency 441000000
cable downstream channel-id 60
cable upstream 0 frequency 11408000
cable upstream 0 power-level 0
cable upstream 0 channel-width 1600000
cable upstream 0 minislot-size 4
cable upstream 0 modulation-profile 1
no cable upstream 0 shutdown
cable upstream 1 power-level 0
cable upstream 1 channel-width 1600000
cable upstream 1 minislot-size 4
cable upstream 1 modulation-profile 1
cable upstream 1 shutdown
cable upstream 2 power-level 0
cable upstream 2 channel-width 1600000
cable upstream 2 minislot-size 4
cable upstream 2 modulation-profile 1
cable upstream 2 shutdown
cable upstream 3 power-level 0
cable upstream 3 channel-width 1600000
cable upstream 3 minislot-size 4
cable upstream 3 modulation-profile 1
cable upstream 3 shutdown
end
Generic sub-interface master critical config
============================================
int Cable6/0/0
ip address 12.1.1.1 255.255.255.0 secondary
ip address 1.6.1.65 255.255.255.0
end
int Cable6/0/0
end
Cisco Broadband Cable Command Reference Guide
3-198
CMTS subinterface critical config
=================================
Chapter 3 Cisco CMTS Show Commands
OL-1581-08