Chapter 4
Commands for the Cisco uBR10012 Router
Redundancy Mode = Hot Standby Redundancy
Maintenance Mode = Disabled
Communications = Up
client_notification_TMR = 30000 milliseconds
Related Commands
Command
associate
clear redundancy
redundancy
redundancy
force-failover
main-cpu
OL-1581-08
my state = 13 -ACTIVE
peer state = 8
-STANDBY HOT
Mode = Duplex
Unit = Primary
Unit ID = 0
Manual Swact = Enabled
client count = 5
RF debug mask = 0x0
Description
Associates two line cards for Automatic Protection Switching (APS)
redundancy protection.
Clears the counters and history information that are used by the
Redundancy Facility (RF) subsystem.
Configures the synchronization of system files between the active and
standby PRE1 modules.
Forces a manual switchover between the active and standby PRE1 modules.
Cisco Broadband Cable Command Reference Guide
show redundancy
4-95