Cisco SR2016T-NA Reference Manual page 281

Chapter 2 Cisco CMTS Configuration Commands
Related Commands Command
cable telco-return enable
cable telco-return interval
cable telco-return
registration-ip
cable telco-return spd dhcp-
authenticate
cable telco-return spd dhcp-
server
cable telco-return spd dial-
timer
cable telco-return spd
factory-default
cable telco-return spd
manual-dial
cable telco-return spd
password
cable telco-return spd ppp-
authenticate
cable telco-return spd
radius-realm
cable telco-return spd
service-provider
cable telco-return spd
threshold
cable telco-return spd
username
OL-1581-08
Description
Enables telco-return functionality.
Defines the interval for sending TCD and Termination System
Information (TSI) messages.
Selects a different IP address for the telco-return CM to send its
registration requests.
Indicates that telco-return CMs must use a specific DHCP server.
Identifies the IP address of the DHCP server that the telco-return
CMs must use.
Sets the number of seconds that a telephone connection is idle before
the telco-return CM disconnects the call.
Indicates the SPD that the telco-return CM uses during the
initialization process.
Enables the telco-return CM to operate in manual-dial mode.
Sets the password that the telco-return CM uses for authentication
when establishing a PPP connection.
Selects the authentication procedure to use when the telco-return CM
is establishing a PPP connection.
Selects a RADIUS server domain to use for the login response string.
Includes the service provider name in the SPD.
Sets the number of failed dial-up connections that can occur before
the CM indicates a connection failure.
Sets the username that the telco-return CM uses for authentication
when establishing a PPP connection.
Cisco Broadband Cable Command Reference Guide
cable telco-return spd phonenum
2-269