Table of Contents
Advertisement
packetcable
Examples
The following example shows PacketCable operation being enabled:
Router# configure terminal
Router(config)# packetcable
Router(config)#
The following example shows PacketCable operation being disabled (default):
Router# configure terminal
Router(config)# no packetcable
Router(config)#
Related Commands
Command
clear packetcable gate
counter commit
packetcable authorize
vanilla-docsis-mta
packetcable element-
id
packetcable gate
maxcount
packetcable timer
show packetcable gate
show packetcable gate
counter commit
show packetcable
global
Cisco Broadband Cable Command Reference Guide
2-454
Description
Resets the counters that track the total number of committed gates.
Allows Unsolicited Grant Service (UGS) service flows without a proper
PacketCable gate ID when PacketCable operations are enabled on the
Cisco CMTS.
Configures the PacketCable Event Message Element ID.
Changes the maximum number of PacketCable gate IDs in the gate database
on the Cisco CMTS.
Changes the value of the different PacketCable DQoS timers.
Displays information about one or more gates in the gate database.
Displays the total number of committed gates since system reset or since the
counter was last cleared.
Displays the current PacketCable configuration.
Chapter 2
Cisco CMTS Configuration Commands
OL-1581-08
Advertisement
Table of Contents
