Table of Contents
Advertisement
clear cable modem delete
clear cable modem delete
To remove one or more CMs from the internal address and routing tables, use the clear cable modem
delete command in privileged EXEC mode.
Syntax Description
mac-addr
ip-addr
cable slot/port
cable slot/subslot/port
all
oui string
reject
Defaults
No default behavior or values
Command Modes
Privileged EXEC
Command History
Release
12.2(11)BC3
12.2(15)BC1
Cisco Broadband Cable Command Reference Guide
2-380
clear cable modem {mac-addr | ip-addr | [cable slot/port] {all | oui string | reject} } delete
clear cable modem {mac-addr | ip-addr | [cable slot/subslot/port] {all | oui string | reject} } delete
Modification
This command was introduced for the Cisco uBR7100 series,
Cisco uBR7200 series, and Cisco uBR10012 universal broadband routers.
The cable interface was made an optional keyword for this command.
Specifies the 48-bit hardware address (MAC address) of an individual
CM.
Specifies the IP address of an individual CM.
(Optional) Identifies the a interface and downstream port on the
Cisco uBR7100 series and Cisco uBR7200 series routers.
On the Cisco uBR7100 series router, the only valid value is 1/0. On the
Cisco uBR7200 series router, slot can range from 3 to 6, and port can
be 0 or 1, depending on the cable interface.
(Optional) Identifies a cable interface on the Cisco uBR10012 router.
The following are the valid values:
slot = 5 to 8
•
subslot = 0 or 1
•
•
port = 0 to 4 (depending on the cable interface)
Deletes all the CMs from the Station Maintenance List.
Deletes all CMs that match the specified Organization Unique
Identifier (OUI). The string parameter can be either the three byte
hexadecimal string (such as 00.00.0C) or a vendor name that has been
defined using the
cable modem vendor
Deletes all CMs that are currently in one of the reject states (see the
description of these states in the
Chapter 2
Cisco CMTS Configuration Commands
command.
show cable modem
command).
OL-1581-08
Advertisement
Table of Contents
