Cisco SR2016T-NA Reference Manual page 998

debug pxf
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28: Entering cobalt_process_to_rp_packet.
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28: Exiting cobalt_to_rp_interrupt, to_rp_head 0, Packets processed 1
01:08:28: ICMP: echo reply rcvd, src 1.0.0.1, dst 1.0.0.1
Router#
debug pxf microcode
The following example shows how to disable the automatic reloading of the microcode on the PXF
processors if a fault or crash occurs:
Router# debug pxf microcode
PXF microcode debugging is on
Router#
If a fault or crash then occurs on the PXF processors, the following messages are displayed on the
console to indicate that the automatic reload of the microcode has been disabled and that the microcode
must be manually reloaded using the
Mar
to slot0:pxf_crashinfo_20020301-212958.
Mar
the PXF
debug pxf stats
The following example shows how to enable debugging of the statistics collector on the PXF processors,
along with some typical debugging messages:
Router# debug pxf stats
PXF hardware statistics debugging is on
Router#
00:05:28: read vpn session 1 stat from toaster
00:05:28: read vpn session 2 stat from toaster
00:05:29: Statcoll: read simple stats failed
00:05:29: Statcoll read simple_octet...: NULL params (hwsb=0xFF, tt_info=0x%C0)
debug pxf subblocks
The following example shows how to enable debugging of the subblocks on the PXF processors:
Router# debug pxf subblocks
PXF Subblocks debugging is on
Router#
Cisco Broadband Cable Command Reference Guide
5-138
0x0064D02E 0x0000FF01 0xE9680100 0x00010100
0x00010000 0xCE8A80FF 0x26420000 0x0000003E
0x1040ABCD 0xABCDABCD 0xABCDABCD 0xABCDABCD
Packet decode: datagramstart 0x0672A480
Header decode: length 114, cause 0x0012
Header decode: rsrc_num 3, column 0
Header decode: flags 1
Cobalt packet passed to RP driver!
1 16:29:58.796: %SLICE_TOASTER-4-PXF_CRASHINFO: Writing Slice (PXF) debug information
1 16:30:00.252: NOTE: 'debug pxf microcode' is set. Use 'micro reload pxf' to restart
microcode reload command.
Chapter 5 Cisco CMTS Debugging Commands
OL-1581-08