Cisco SR2016T-NA Reference Manual page 564

show cable modem classifiers
show cable modem classifiers
To display information about the classifiers for a particular CM, use the show cable modem classifiers
command in privileged EXEC mode.
Syntax Description
ip-address
mac-address
cache
verbose
Command Modes
Privileged EXEC
Command History Release
11.3 NA
12.1(4)CX and
12.2(4)BC1
Usage Guidelines
This command displays classifier information for a particular CM, identified either by its IP address or
MAC address.
Also see the information about this command's behavior in a Hot Standby Connection-to-Connection
Note
Protocol (HCCP) configuration, see the
Protocol (HCCP) Configuration" section on page
Examples
The following example shows sample output for the default classifiers option for a particular CM:
Router# show cable modem 10.4.0.81 classifiers
CfrId
6431
6429
6432
6430
Router#
Table 3-17
Cisco Broadband Cable Command Reference Guide
3-68
show cable modem {ip-address | mac-address} classifiers [cache | verbose]
Displays classifier information for the CM with the specified IP address.
Displays classifier information for the CM with the specified MAC address.
(Optional) Displays the classifiers in the cache maintained for each CM.
(This cache is based on IP header field values and speeds up classifier
lookups and reduces per-packet processing overhead.)
(Optional) Displays detailed information for the CM classifiers.
Modification
This command was introduced.
The number of matches field was added to this command, and the command
was restricted to display information for a single CM at a time.
SFID CM Mac Address
26120 0000.399f.a44f
26054 0000.399f.a44f
26121 0000.399f.a44f
26055 0000.399f.a44f
describes the fields that are shown in the show cable modem classifiers display:
"Operation with Hot Standby Connection-to-Connection
3-54.
Direction State Priority
upstream active 128
upstream active 128
downstream active 128
downstream active 128
Chapter 3 Cisco CMTS Show Commands
Matches
-
-
1182
3934
OL-1581-08