Table of Contents
Advertisement
debug pxf
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 11.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/8/8 ms
Router#
01:08:28: Entering c10k_cobalt_send.
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28: Entering cobalt_pak_to_fromrp_ring_inline, scattered FALSE
01:08:28:
01:08:28: Entering c10k_cobalt_type0_interrupt, status reg: 0x00000018.
01:08:28:
01:08:28: Entering cobalt_to_rp_interrupt.
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28: Entering cobalt_process_to_rp_packet.
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28: Entering cobalt_process_to_rp_packet.
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28: Exiting cobalt_to_rp_interrupt, to_rp_head 30, Packets processed 2
01:08:28:
01:08:28: Entering cobalt_from_rp_interrupt.
01:08:28:
01:08:28:
01:08:28:
01:08:28:
01:08:28: ICMP: echo reply sent, src 11.1.1.1, dst 11.1.1.1
01:08:28: Entering c10k_cobalt_send.
01:08:28:
01:08:28:
Cisco Broadband Cable Command Reference Guide
5-136
Packet decode: datagramstart 0x067D14C8 length 116
Header decode: Chan 0, VCCI 2
Header decode: flags 0x0000
c10k_cobalt_send: Checked the idb state.
c10k_cobalt_send: Checked the FromRP Q count.
c10k_cobalt_send: Particle count 0.
cobalt_pak_to_fromrp_ring_inline from_rp_tail 13
ToRP Dispatched.
cobalt_to_rp_interrupt: to_rp_head 28
cobalt_to_rp_interrupt: descriptor address 0x0672F900
descriptor buf pointer 0x0672AC00
descriptor buf length 114
descriptor buf flags 0x000C
cobalt_to_rp_interrupt, PAK DATA:
0x00720012 0x180100FF 0x00000F00 0x08004500
0x0064D02E 0x0000FF01 0xE9680100 0x00010100
0x00010800 0xC68A80FF 0x26420000 0x0000003E
0x1040ABCD 0xABCDABCD 0xABCDABCD 0xABCDABCD
Packet decode: datagramstart 0x0672AC00
Header decode: length 114, cause 0x0012
Header decode: rsrc_num 3, column 0
Header decode: flags 1
Cobalt packet passed to RP driver!
cobalt_to_rp_interrupt: to_rp_head 29
cobalt_to_rp_interrupt: descriptor address 0x0672F910
descriptor buf pointer 0x0672A980
descriptor buf length 114
descriptor buf flags 0x000C
cobalt_to_rp_interrupt, PAK DATA:
0x00720012 0x280100FF 0x00000F00 0x08004500
0x0064D02F 0x0000FF01 0xD3650B01 0x01010B01
0x01010800 0x9AEB1885 0x1A1F0000 0x0000003E
0xB07CABCD 0xABCDABCD 0xABCDABCD 0xABCDABCD
Packet decode: datagramstart 0x0672A980
Header decode: length 114, cause 0x0012
Header decode: rsrc_num 5, column 0
Header decode: flags 1
Cobalt packet passed to RP driver!
FromRP Dispatched.
Cleaned descriptor 0x0672FB10.
desc buf ptr 0x00000000.
desc buf len 0x00000000.
desc buf flags 0x00000000.
Packet decode: datagramstart 0x067D1608 length 116
Header decode: Chan 0, VCCI 2
Chapter 5
Cisco CMTS Debugging Commands
OL-1581-08
Advertisement
Table of Contents
