Table of Contents
Advertisement
Chapter 3
Cisco CMTS Show Commands
Table 3-55 show interface cable monitor Field Descriptions (continued)
Field
Time Stmp
Outbound Interface
Flow Type
Flow Type Identifier
Flow Extn.
MAC Type
Encap
Type
In Cisco IOS Release 12.1(12)EC, Release 12.2(8)BC1, and later releases, you can add a timestamp to
Tip
show commands using the exec prompt timestamp command in line configuration mode.
Related Commands
Command
cable monitor
OL-1581-08
Description
"Yes" indicates that forwarded packets have been time-stamped,
with appended 4 bytes. "No" indicates that forwarded packets have
not been time-stamped.
Identifies the interfaces where the packets have been forwarded to
(Ethernet or Fast Ethernet).
Identifies the selected flow type, MAC-address, access-list
number, or upstream port number.
MAC address, access-list number, or service ID.
"Yes" indicates that extended filters are configured, and "no"
indicates that no extended filters have been configured.
Not applicable.
DOCSIS encapsulation.
Forwarded packets with Ethernet encapsulation.
Description
Displays cable interface information.
Cisco Broadband Cable Command Reference Guide
show interface cable monitor
3-223
Advertisement
Table of Contents
