Table of Contents
Advertisement
Chapter 5
Cisco CMTS Debugging Commands
debug cable remote-query
To display debug messages for remote modem queries, use the debug cable remote-query command in
privileged EXEC mode. To stop displaying debug messages, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Release
12.0(7)XR, 12.1(2)T
12.1(2)EC1
12.2(4)BC1b
Examples
The following example shows typical debugging output for a successful poll of the CMs:
router# debug cable remote-query
remote-query debugging is on
.
For IP address 209.165.200.223
Nov 10 15:56:50.241: docsIfSignalQualityEntry.5.4 = 380
Nov 10 15:56:50.241: docsIfMibObjects.2.2.1.3.2 = 360
Nov 10 15:56:50.245: docsIfDownstreamChannelEntry.6.4 = -30
Nov 10 15:56:50.245: docsIfUpstreamChannelEntry.6.3 = 12422
Nov 10 15:56:50.249: docsIfSignalQualityEntry.6.4 = 0
Nov 10 15:56:50.477:
The following example shows typical debugging output when the waiting queue at the CMTS is empty:
SNMP proxy exec got event, but queue is empty
The following example shows typical debugging output when you try to modify the polling interval or
community string while the polling in is progress:
Community string if modified will not be reflected
Note
OL-1581-08
debug cable remote-query
no debug cable remote-query
The polling interval will be changed but to change the community string, you must unconfigure
the snmp-server community command and reconfigure it with the new community string.
Modification
This command was introduced.
Support for this command was added to the 12.1 EC train.
Support for this command was added to the 12.2 BC train.
Cisco Broadband Cable Command Reference Guide
debug cable remote-query
5-67
Advertisement
Table of Contents
