Table of Contents
Advertisement
service-class
To enable Baseline Privacy Interface (BPI) operations on the cable command, you must specify both the
Note
service-class privacy and
Examples
The following example shows how to specify the service-class command for a DOCSIS configuration
file:
router(config)# cable config-file upgrade.cm
router(config-file)# service-class 1 priority 0
router(config-file)# service-class 1 max-upstream 3247
router(config-file)# service-class 1 max-downstream 10000
router(config-file)# service-class 1 max-burst 1600
router(config-file)# service-class 1 privacy
router(config-file)# privacy
router(config-file)# exit
router(config)#
Related Commands
Command
cable config-file
access-denied
channel-id
cpe max
download
frequency
option
privacy
snmp manager
timestamp
Cisco Broadband Cable Command Reference Guide
2-474
privacy
commands for the cable modem's DOCSIS configuration file.
Description
Creates a DOCSIS configuration file and enters configuration file
mode.
Disables access to the network.
Specifies upstream channel ID.
Specifies CPE information.
Specifies download information for the configuration file.
Specifies downstream frequency.
Provides config-file options.
Specifies privacy options for baseline privacy images.
Specifies Simple Network Management Protocol (SNMP) options.
Enables time-stamp generation.
Chapter 2
Cisco CMTS Configuration Commands
OL-1581-08
Advertisement
Table of Contents
