Robot Selection And Parameter Backup - Mitsubishi Electric MELFA CR750 Series User Manual

13.4.6. Robot selection and parameter backup

Select the robot to execute the re-teaching.
The Robot is displayed as follows.
Ver.1.1 or earlier
Ver.1.2 or later
To backup parameters, click [Backup].
The dedicated backup screen starts. For more details on backups, see "15 Backup and Restore".
Backed up parameter files can be written back to a robot controller using the "backup/restore" functions of this
software.
When the preparations are completed, click the [Next] button.
Memo
Parameter Backup
During its operation, this software overwrites parameters to the robot controller.
It is recommended that the parameters be backed up at this point to allow the controller to revert to
the original parameters.
13-269
Figure 13-23 Robot and Backup Parameters Selection Window
Controller number : Controller Name + Mechanism Name #Mechanism No.
Controller number : Mechanism Name #Mechanism No.
Displayed only in multi-mechanism mode.
13-269