Warm-Up Operation Parameter - Mitsubishi Electric MELFA CR750 Series User Manual

11.3.11.

Warm-up operation parameter

You can set information related to the robot's warm-up function.
Set parameters while connected to the robot controller.
From the project tree, double click the target project [Online] -> [Parameter] -> [Movement parameter] ->
[Warm-up].
After you change the parameter value, you can rewrite the parameters in the robot controller by clicking the
[Write] button.
Figure 11-21 Warm-up operation parameter
You can reference explanations of displayed parameters by pressing the [Explain] button.
11-176 11-176