Mitsubishi Electric MELFA CR750 Series User Manual page 86

6.2.5.3. When NET/10(H), CC IE is selected
In this software version 2.20W or later, it is possible to communicate using "CC-Link IE controller network
port" or "CC-Link IE field network port" newly established in QnCPU.
When "NET/10, CC IE" is selected as the computer interface, the communications routes that you can select
are as follows.
Table 6-7 Communications Routes That Can Be Selected for "NET/10(H), CC IE"
No.
1 NET/10(H), CC IE board communication
unit
2 NET/10(H), CC IE board communication
unit – CC-Link other station access
3 NET/10(H), CC IE board communication
Serial communication other station access
Figure 6-8 NET/10(H), CC IE (NET/10(H), CC IE Board Communication
NET/10(H), CC IE through NET/10(H), CC IE Unit – CC-Link Other Station Access) Detailed Settings
For some communications routes that you can select, "(5)Network communication route setting of MNET/10"
and "(6)Coexistence network route setting of C24" can not be set.
6-86
Communications Route
Other station access through NET/10(H), CC IE
NET/10(H), CC IE through NET/10(H), CC IE
NET/10(H), CC IE through NET/10(H), CC IE unit -
6-86