Tcp/Ip (Ethernet) Communication Settings - Mitsubishi Electric MELFA CR750 Series User Manual

6.2.2. TCP/IP (Ethernet) Communication Settings

Input the IP address assigned to the robot controller connected to, then click the [OK] button.
Table 6-3 TCP/IP Communication Setting Items and Default Values
Item
IP address
Port used
Send timeout
Receive
timeout
Retries
(*1) The setting range of Send timeout, Receive timeout and Retries are limited function of this
software Ver.1.2 or later.
For help with the computer side network settings (IP address, subnet mask, default gateway, etc.), ask the
network administrator.
Moreover, for details on the communication settings on the robot controller side, please refer as follow.
CR750/700
CRn-500
Caution
When connecting to 10 or more robot controllers at the same time.
When connecting to 10 or more robot controllers at the same time, set the reception timeout
time to at least 10000 msec, because it takes time to connected processing.
6-78
Figure 6-3 TCP/IP Communication Settings
Explanation
Sets the IP address of the robot controller
connected to.
Number of the port used for communications
Timeout time for sending
Range that can be set (*1)
Minimum value
Maximum value
Timeout time for receiving
Range that can be set (*1)
Minimum value
Maximum value
Number of communication retries
Range that can be set (*1)
Minimum value
Maximum value
: See "Detailed explanations of functions and operations" and "Standard
Specifications" in the user's manual for the robot controller.
: See "Ethernet Interface Option User's Manual".
1000 msec
: 1000 msec
: 30000 msec
20000 msec
: 5000 msec
:120000 msec
: 0
: 10
Default value
Ver.1.1 Ver.1.2
or earlier or later
Blank
10001
5000 msec
30000 msec
3 0
6-78