Mitsubishi Electric MELFA CR750 Series User Manual page 410

-
Rename the title or hand file name
Click [Rename] button when you rename the title of the hand file register or the hand file name. The
following dialog will be shown, you can input either a title after the change or the file name after the change by
clicking [...] button. And then, click the [OK] button.
-
Delete hand file
Click [Delete] button when you delete hand file or remove the existing hand file register. After clicking
[Delete] button, the following dialog will be shown. Click [Remove] if you remove only a hand file register, don't
delete a hand file. Click [Delete] if you delete a hand file and remove a hand file register, too.
-
Edit a hand file
Click [Edit] button if you edit hand parts in a hand file.
Editing method of a hand file, refer to "17.3.9.3 Hand".
-
Set condition of hand file
Click [Set condition] button when you set conditions of a hand file. If you set conditions to a hand file, you
can show the file only in specified I/O status and tool #.
Setting method of a hand file, refer to "17.3.9.2 Hand file condition screen".
17-410
Figure 17-47 Rename
Figure 17-48 Remove or Delete hand files selection
17-410