Mitsubishi Electric MELFA CR750 Series User Manual page 338
Hide thumbs
Also See for MELFA CR750 Series:
- Instruction manual (159 pages) ,
- Manual (2 pages) ,
- Ethernet function instruction manual (146 pages)
Table of Contents
Advertisement
16.2.2.5. Program name
The name of program being executed is displayed.
(1) Click the position (block) in which program name is displayed (<a>). Left side of the box is arranged in this
position.
(2) After "Select item" window is displayed, click [Robot information] button (<b>).
(3) Select "Program name" (<c>) as the type on "Create robot information" window.
(4) After setting the information of program name, click [OK] button (<d>).
<1>
<2>
<3>
<4>
<d>
<1> Size
<2> Slot
<3> Arrangement
<4> Color
16-338
<a>
<c>
Figure 16-10 Creating a display of the program name
: Set the width of box in which program name is displayed. The value from 1
to 16 can be set.
: Select task slot number for which the program is executed.
The range of slot number that can be set is different according to the
system that uses it.
: Select the position in which the program name is arranged.
: Select the background color of the area where the program name is
displayed.
<b>
When User definition screen (TB) is shown
16-338
Advertisement
Table of Contents
