Mitsubishi Electric MELFA CR750 Series User Manual page 449

(4) Installer starts and the Setup screen appears. Install according to the instructions that appear on the
screen.
The Product ID is needed when this "MelfaRXM.ocx" is installed. Input the Product ID same as the Product
ID of "RT ToolBox2". "MelfaRXM.ocx" can be installed with the Product ID of standard version, but can not
be installed with Mini version.
The product is installed as in "Table 20-1 Files to be Installed".
No. Description
1 MelfaRXM.ocx
2 communication DLLs
3 RoboCom.exe
(communication server2 )
4 Instruction Manual
(this document)
5 Sample programs
6 Redistribution files
7 Information files for
USB driver
(for CR750-Q/CRnD-700)
20-449
Figure 20-4 Input Product ID
Table 20-1 Files to be Installed
These files are installed under the system folder.
For example:
32bitOS : \Windows\System32
64bitOS : \Windows\SysWOW64
A folder specified during install operation (Normally, C:/ is used.)
[MelfaRXM_Dev]
ReadMe.txt ······ text file which indicated notes
[RoboCom] ······ folder of communication server
[Doc] ·············· folder of Instruction Manual
[Sample] ········· folder of sample programs
[BCB] ··········· Borland C++ Builder (5.0)
[CS] .................... Visual C# (Visual Studio 2010)
[VB] ············· Visual Basic (6.0)
[VC++]·········· Visual C++ (6.0)
[VB.NET] ······ Visual Basic .NET 2003
(This has confirmed the operation only in a Japanese version.)
[Redist]
[Installer] ······· folder of system files Installer (for redistribution)
Install destination
20-449