1.3.
Items to be prepared by the customer
This explains what the customer needs to prepare in order to use this software
1.3.1. Computer system
Use a computer that meets the specifications given in: "1.4 Operating Environment".
1.3.2. Computer cable
Prepare the cable for connecting the controller and the computer. The cable required depends on the
connection specifications and controller used, as shown below.
For the RS-232 cable refer to the "Standard Specifications" for your robot.
Table 1-1 CR750-D/CRnD-700/CRn500 Series Communication Cables
Method
USB
USB A type, USB mini B type
Ethernet
10BASE-T, 100BASE-TX
For controller front panel
RS-232
For expansion option box (CR1-EB3)
Method
USB
USB A type to mini B type
Ethernet
10BASE-T, 100BASE-TX
For connecting by personal computer -
PLC CPU
RS-232
(when Personal computer connector is
D-sub, 9-pin)
Caution
Use of USB to RS-232 does not guarantee normal operation.
When you use USB to RS-232 cable, normal operation is not guaranteed.
If you want to use RS-232 as a communication port, use of computer with serial ports is
recommended.
1-22
Description
CRnD-700
series
CRn-500
series
Table 1-2 CR750-Q/CRnQ-700 Series Communication Cables
Description
Model name
-
-
2D-232CBL03M
RS-MAXY-CBL
RS-AT-RCBL
(for expansion serial
interface (option))
RS-AT-RCBL
Cables confirmed by Mitsubishi Electric to operate
properly
Model name
ZUM-430
USB-M53
GT09-C20USB-5P
MR-J3USBCBL3M
QC30R2
Manufacturer
-
-
Mitsubishi Electric
Mitsubishi Electric
Mitsubishi Electric
Manufacturer
Loas Co.
Elecom Co.
Mitsubishi Electric System
Service
Mitsubishi Electric
Mitsubishi Electric
1-22