12.1.4. Errors
The errors currently occurring in the robot controller are displayed.
12.1.4.1. Referencing the current error
From the project tree, double click the target project [Online] -> [Monitor] -> [Movement Monitor] -> [Error].
[Details]
You can check details (cause and recovery method) on errors.
[History]
You can reference the history of errors that have occurred.
[Record]
You can reference the record of errors that have occurred. Note that this function can
be used with Version 1.7 or later of this software and with Version R1j/S1j or later of.
connected controller.
12.1.4.2. Details
You can check details (cause and recovery method) on errors. On the error screen, select an error, then
either click the "Details" button or double click the error.
12-227
Figure 12-7 Error Screen
Click or double click the [Details] button.
Figure 12-8 Error Details Screen
Only Version 1.7 or later.
12-227