Flow Of Operations - Mitsubishi Electric MELFA CR750 Series User Manual

16.4.3. Flow of operations

Select a DXF file to be imported <a>
Select the layer to be imported <b>
Select the entity you want to import <c>
Use the Ex-T control
Setting of the gripping position of the imported
entity and Ex-T coordinates <d>
Set the posture of each point <f>
Spline file selection
Spline file output <g>
<g> Spline file output
Select the [Spline file] as the output format in the [Generated Points] page, click the [Finish] button. Spline
file edit screen opens, point sequence data that is generated will be output. If you click the [Yes] button in the
import completion message, the save dialog of spline file is displayed. Specify the spline file number you want
to save you can save the spline file by clicking the [Save] button.
16-367
Not use EX-T control
Calibration performed for coordinate
transformation <e>
Robot program selection
Figure 16-40 Flow of operations
Robot program output <h>
16-367