15.5.
Check Backup programs
You can confirm that there is no error in backed up programs.
Select the backed up information, and click the right mouse button. From the right mouse button menu, select
[Check Backup programs]. You can use this function in "All", "Program" and "System Program".
If there is an abnormality in the program, a robot controller can't execute the program. In this case, please do
as follows.
1. You don't restore the backed up information in which there is an abnormal program.
2. After you restore the backed up information, you delete the abnormal program from the controller.
This function can be used with Version 3.50C or later of this software.
Figure 15-16 Check Backup programs
15-325
15-325