Deletion Of All Robot Programs - Mitsubishi Electric MELFA CR750 Series User Manual

13.2.3. Deletion of all robot programs

This deletes all the programs in the robot controller.
On the initialization screen, click the program group [Initialize] button.
A confirmation screen is displayed, so input "Yes", then click the [OK] button.
Caution
When the password is registered in "program" by robot controller's
security function, it is not possible to delete all the programs in the robot
controller.
When the password is registered in "program" by robot controller's security function, it is not
possible to delete all the programs (initialize the programs) in the robot controller.
Deletion of all robot programs.
Please delete the password of robot controller's security function when you operate these.
Please refer to "13.7.3 Delete the Password" for the method of deleting the password.
The setting(register the password) and the release(delete the password) of robot controller's
security function can be used with this software version 2.00A or later. Please refer to "Table
13-15 Compliant version of this function and controller" for robot controller's compliant
version
13-255
Figure 13-11 Confirmation Screen for Program File Initialization
Item to which password of security function is registered.
Program Parameter
× ○
○ : Enable、 × : Disable
File
○
13-255