Mitsubishi Electric MELFA CR750 Series User Manual page 117

Hide thumbs Also See for MELFA CR750 Series:

Table of Contents

8.6.4.12. Syntax check

You can check whether or not the edited robot program is syntactically correct. Execute this before writing the

program to the robot controller.

Click on the menu bar [Tool] -> [Check Syntax]. If there is a syntax error, the error location and details are

Figure 8-35 Syntax Check Results Screen

If you select the detected error and click the [Jump] button, it jumps to the command statement with the error.

Melfa cr700 series Melfa cr500 series Melfa rt toolbox2Melfa rt toolbox2 min