8.10.
Set / Release reading protection
If you set the reading protection to the robot program, you can make sure the third person can't read it easily.
This function can be used with Version R5n/S5n or later of the controller software, Version 3.40S or later of
this software.
A program which is set the reading protection is displayed
protection, you can limit these operations as follows.
-
Opening a program (You can limit to confirm the program and to change it.)
-
Starting debug of a program
-
Copy / Move / Delete / Rename / Compare a program
If you set / release reading protection of a program, use the program management screen with reference to
"8.11.6 Protect settings" or select [Set / Release reading protection] on the project tree.
Figure 8-59 Set / Release reading protection operation on the project tree
8-135
on the project tree. If you set the reading
8-135