Connection Settings - Mitsubishi Electric MELFA CR750 Series User Manual

6.2.

Connection Settings

Click the name of the project to display the project tree for with the right button of the mouse, then from the right
button menu, click [Edit Project]. The project edit screen is displayed.
Select the controller to connect to and the communications method, then click the "Detailed Settings" button
to set the details.
Normally, the offline robot settings and the travel platform settings for display are also set according to the
controller connected to.
After you complete the details settings, click the [OK] button.
The detailed settings screen will be explained from the next item.
Caution
Do not connect from multiple projects to 1 controller at the same
time.
Do not connect from multiple projects to 1 controller at the same time.
Data might not be able to be read correctly referring to the same data.
Do not connect USB to multiple controllers from 1 computer.
When using USB connection, 1 computer can connect to only 1 robot controller. It is also not
possible to connect to multiple controllers by using the USB hub.
6-76
Figure 6-1 Connection Settings
6-76