Distance Measurement - Mitsubishi Electric MELFA CR750 Series User Manual

17.3.4. Distance measurement

You can measure the distance between any two points on objects (robots, layouts etc.) displayed in 3D
monitor.
To use this feature, click the menu bar [3D View] -> [Distance measurement]. The distance measurement
screen is displayed. Then when you click while entering the space key two points on objects to be measured,
the line and distance (mm) as follows are displayed.
This function can be used with Version 3.40S or later of this software.
Figure 17-12 Distance measurement between two points
The distance measurement screen displays the history of positions and distances of each measurement. If
you turn ON / OFF a checkbox of each line, you can show / hide the line and the distance of the measurement.
The history keeps during the 3D monitor is opened.
17-379 17-379