Restoring The Edited Parameter To The Robot Controller - Mitsubishi Electric MELFA CR750 Series User Manual

11.10.5.

Restoring the edited parameter to the robot controller

Open the target parameter in the project tree with [Offline] -> [Parameter], and select the parameter folder,
and then click the right mouse button. The right button menu is displayed, so click [Restore]. After the restore
window is displayed, confirming the model of the robot and restore them.
Figure 11-76 Restoring the edited parameter to the robot controller
Caution
All parameters in the robot controllers are changed,
All parameters in the robot controllers are changed, when the parameters edited by offline are
restored. These parameters are initialized when the parameters set beforehand in the robot
controller is not in the file edited by offline.
11-218
when the parameters edited by offline are restored
.
11-218