Travel Base Setting For Display - Mitsubishi Electric MELFA CR750 Series User Manual

6.2.6. Travel base setting for display

Set the traveling axis for display. You can set J7 and J8 axes to the traveling axis.
Figure 6-12 Travel base setting for display
6.2.6.1. Travel base setting
Click the [Detail] button, Travel axis setting dialog is displayed.
Figure 6-13 Travel axis setting dialog
Select the [Use travel axis] checkbox, you can set Travel Joint, Travel direction, Movement limit and Travel
base information.
Travel direction is as followings. Note that [Z +direction]/[Z -direction] can be set with version 3.20W or later of
this software. When [Z +direction]/[Z -direction] is set to Travel direction, the travel base does not display.
6-90 6-90