8.7.2. Saving on computer
Saves the program being edited to the computer. At this time, you can set a new program name.
Click on the menu bar [File] -> [Save to PC].
Input the robot program name, and then click the [OK] button.
Caution
Folder in which programs are stored
Programs on the computer are managed in units of workspace projects. The folder they are
stored into is workspace writing folder/project name/Program.
To store into any other folder, first store in this folder, then copy into the desired folder with the
program management copy function.
Caution
About the program name which is disable on PC
Windows, error is occurred in the Program editing tool when opening that program. To solve this
problem, it is necessary to change the program name in the robot controller.
The "Reserved words" are the special words used by Windows system. Therefore, it is
impossible to use these words as the file name on PC. The following words are in "Reserved
words".
AUX, COM1 to 9, CON, LPT1 to 9, NUL, PRN
8-123
Figure 8-44 Saving on Computer
8-123