Copy; Delete; Rename - Mitsubishi Electric MELFA CR750 Series User Manual

Table 13-18 The file which cannot be operated on a file management screen, and its extension
No.
1 Robot program files
2 Parameter files
3 Error log files
4 I/O Log (Input/Output)
5 Trap function log files(program execution log files)
6 Servo data log files
(This file is reconstructed at the time of the power
supply ON.)
7 Force control log file
(This file is deleted at the time of the power supply
OFF.)
8
Error record log files
9
10 Command information file
11 System files
(Backup information etc.)
12 Serial information file
(This file is created at the time of backup)

13.8.2. Copy

The files are copied.
Select the transmission source file names from the list at the left, and designate the transmission
destination folder on the right side. The multiple transmission source files can be selected at the same time
Click [Copy] button after choosing the file to copy and setting up a transmission place. The file is copied
after a copy confirmation message display.
When the file of a same name exists in a transmission place, an overwrite confirmation message is
displayed.

13.8.3. Delete

The files are deleted.
Select the file to delete in the list. It is possible to select some files simultaneously. All the files selected
by a list of both right and left are deleted. Click [Delete] button after selecting some files in the lists. A
deletion confirmation message is displayed.

13.8.4. Rename

The file is renamed.
Select one file in the list. It is possible to select a file from both of the lists. Click [Rename] button, and input
new file name in "Setup for Rename" dialog.
13-305
Files
Figure 13-52 Setup for Rename
File name or
extension
.MB4/.MB5/.prg
.PRM
AError.log
CError.log
HError.log
LError.log
IOLogInp.log
IOLogOut.log
.trp
.sdl/.sdb
.fsl
TTLERROR.DAT
ERRORLOG.CSV
COMMANDS.XML
.SYS
.ser
13-305