11.1.4. Parameter list reading
If no parameter name is displayed on the parameter list screen, you can read the parameter list.
Click the parameter list [Read] button in the upper-right of the parameter list screen. The parameter list select
screen is displayed.
Figure 11-6 Parameter List Reading
Select the source to read from ("Read from RC" or "Read from file"), then set the parameter list to read and
click the [OK] button.
11.1.5. Finding parameters
You can find a character string in the displayed parameter list. With the "Parameter List" screen active, click on
the menu bar [Parameter] -> [Find]. The character string find screen is displayed.
Figure 11-7 Finding a Character String
Input the character string to search for, and then click the [Find] button. Parameters that include the input
character string are displayed.
11-164
11-164