Monitor - Mitsubishi Electric MELFA CR750 Series User Manual

12.1.5. 3D Monitor
You can display the robot and its movements in 3D to check them.
From the project tree, either double click the target project [Online] -> [<Robot model name>] or select [3D
Monitor] with the mouse right button menu. The robot 3D display screen is displayed. If the "display travel
table setting" is made for the project, the travel table is also displayed.
Either double click the robot model name or
select [3D Monitor] with the mouse right
The robot model that displays in 3D monitor can be selected from "Detailed model" and "Simple model" with
Version 3.20W or later of this software.
It displays by "Detailed model" in the initial state. Please refer to the edit of "5.7 workspaces" for the method
of the change to "Simple model".
It is not possible to display by "Detailed model" with Version 3.10L or earlier of this software.
Recommended environment to display "Detailed model" is as follows.
Item
CPU
Main memory
12-232
button menu.
Figure 12-16 Starting Robot View
Detailed model
Figure 12-17 Kind of robot model
Core2 Duo, Core i3 3 GHz or higher.
2 GB min.
Simple model
Recommended environment
12-232