Mitsubishi Electric MELFA CR750 Series User Manual page 92

6.2.6.2. Robot additional axis parameter setting
Select the [Set the additional axis parameter of the simulation automatically by the content of the above
setting] checkbox, the setting content of the traveling axis is applied to robot additional axis parameters of the
simulation. To use setting parameters in the simulation, clear the checkbox.
In the case of using version 3.10L or earlier, the setting content is applied to the parameters at all times. This
function can not be used with the mini edition.
* The additional axis parameters include these parameters.
AXMENO,AXJNO,AXUNT,AXGRTD,AXGRTN,AXACC,AXDEC,AXMREV,AXJMX,AXENCR,MEJAR
6-92 6-92