Adding A Project - Mitsubishi Electric MELFA CR750 Series User Manual

5.8.

Adding a Project

You can create up to 32 projects in one workspace.
Click [Workspace] -> [Add Project].
After setting the project name, information on the robot connected, and the communication method, then click
the [OK] button.
The project is added to the workspace.
Projects can also be added from a project tree.
After selecting the workspace, use the mouse right button to select [Add project]. Or, double click the workspace
name on the project tree. (Note that this function can be used with Version 1.3 or later of this software)
Caution
Add a new projects offline.
It is possible to add a new project offline. A new project cannot be added, when the status of either of
project is "Online" or "Simulation".
Don't add a project to the workspace made with iQ Works(MELSOFT Navigator).
Don't add a project to the workspace made with iQ Works(MELSOFT Navigator). It becomes impossible
to take the correspondence in iQ Works(MELSOFT Navigator) when these information is changed.
5-65
Figure 5-10 Adding a Project
Figure 5-11 Adding a Project from a Project Tree
5-65