Starting I/O Simulator - Mitsubishi Electric MELFA CR750 Series User Manual

19.4.

Starting I/O Simulator

Before starting I/O simulator, create a I/O simulator definition file.
For explanation of creating a I/O simulator definition file, refer to "19.2 Simulator settings".
Click [Start I/O simulator] button on toolbar to start I/O simulator during the simulation.
Starting I/O simulator
Figure 19-10 Starting I/O simulator
Click [Start I/O simulator] button, and then the following [I/O simulator start] screen is displayed.
Figure 19-11 I/O simulator start screen
Click the [Browse] button to select a I/O simulator definition file. The file used in the simulation can be checked
on the [Simulator setting] screen.
I/O simulator start, and the character "I/O Simulator" is displayed on the status bar.
When GX Simulator2 is connected, the character "GX Simulator2" is also displayed.
Connecting with GX Simulator2
Figure 19-12 Status bar during I/O simulator operating
19-445 19-445