Io Unit Parameter - Mitsubishi Electric MELFA CR750 Series User Manual

11.8.2. IO unit parameter

You can set information related to the I/O unit of the PLC.
Set parameters while connected to the robot controller.
This function can be used with Version 2.10L or later of this software.
Set parameters while connected to the robot controller.
From the project tree, double-click the target project [Online] -> [Parameter] -> [PLC cooperation parameter]
-> [IO unit].
Figure 11-70 IO unit parameter
When a unit number in [Unit #] is specified, the parameter of the specified unit number is displayed in the PC
IO unit.
In the [IO sharing when using Multiple CPUs], it is set up whether XY signals read or they don't read
You can reference explanations of displayed parameters by pressing the [Explain] button.
After you change the parameter values, you can rewrite the parameters in the robot controller by clicking the
[Write] button.
11-211 11-211