Melfarxm.ocx Communications Middleware Setup; Cd-Rom Contents - Mitsubishi Electric MELFA CR750 Series User Manual

20. MelfaRXM.ocx Communications Middleware Setup

20.1. Summary
MelfaRXM.ocx is an ActiveX controller that communicates with CR750/700/500 series robot controllers.
MELFARXM.ocx can only be used if you have purchased the standard edition of RT ToolBox2. (Customers
who have purchased the mini edition can not install MELFARXM.ocx.)
When using only the RT ToolBox2 functions, there is no need to set up "MELFARXM.ocx".
Using MELFARXM.ocx enables you to simply produce Windows applications connected to a robot controller
on the customer's device.
The user's manual for using MelfaRXM.ocx and the cautions are on the RT ToolBox2 standard edition
CD-ROM.
The ways to communicate with CR750/700 series robot controllers are RS-232(CRnD-700), Ethernet
and USB(CR750-D/CRnD-700).
To communicate with CRnQ and GOT, RT ToolBox2 must be installed.
20.2.

CD-ROM Contents

The contents of the "RT ToolBox2" (standard edition) CD-ROM are as follows.
/:
Communications
middleware
MelfaRXM.ocx
related file
For details on MelfaRXM.ocx usage methods, refer to the user's manual on the CD-ROM.
20-447
RT ToolBox2 installation files
:
:
:
:
Figure 20-1 CD-ROM Contents
This is cautions for using MELFARXM.ocx.
MelfaRXM.ocx installation files
This is the MELFARXM.ocx user's manual.
20-447