Mitsubishi Electric MELFA CR750 Series User Manual page 41

Hide thumbs Also See for MELFA CR750 Series:
Table of Contents

Advertisement

If the USB driver cannot be installed, click the following setting.
If you have selected "Block-Never install unsigned driver software" after [Control Panel] - [System] -
[Hardware] - [Driver Signing], the USB driver may not be installed.
Choose "Ignore-Install the software anyway and don't ask for my approval" or "Warn-Prompt me each time
to choose an action" for [Driver Signing], and install the USB driver.
1.5.5.2. When using Windows Vista
When you connect the GOT and the computer by the USB cable, installation starts and completes
automatically.
1.5.5.3. When using Windows 7 / 8 / 8.1 / 10
When you connect the GOT and the computer by the USB cable, installation starts and completes
automatically.
1-41
(Completed)
4) The screen on the left appears to
indicate completion of installation.
Click the [Finish] button to terminate
installation.
1-41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melfa cr700 seriesMelfa cr500 seriesMelfa rt toolbox2Melfa rt toolbox2 min

Table of Contents