Table of Contents
Advertisement
Appendix 3.4 Selection of Stabilized Power Supply
Consider the following characteristics when selecting the stabilized power supply. (prepared by
customer)
Use a power supply that complies with CE Marking or that follows the standards given below.
Stabilized power supply selection items
Item
Voltage fluctuation ±5%
Output
Ripple noise
fluctuation
Spike noise
Output current
Output holding time
Standards
Safety Standards
Noise Terminal Voltage
High Harmonics Current Restrictions : IEC1000-3-2
Appendix 3 Parts for EMC Measures
Appendix 3.4 Selection of Stabilized Power supply
Max. 120mV
Max. 500mV
—
Min. 20ms
: UL1950, CSA C22.2 No. 234 approved, IEC950 compliant
: FCC Class A, VCCI-1 Class
Conditions
±5% or less of 24VDC output
±5% or less of 24VDC output
Refer to this manual
Instantaneous off time
107
Advertisement
Table of Contents
