Mitsubishi Electric MELFA CR750 Series User Manual page 408

The position data which can be displayed is as follows.
Preservation place
Robot program in
the robot controller
Robot program in
the project
17-408
Table 17-4 The position data which can be displayed
Kinds of program
Movemaster command
MELFA-BASIC Ⅳ
MELFA-BASIC V
SQ Direct
Movemaster command
MELFA-BASIC Ⅳ
MELFA-BASIC V
SQ Direct
Backup programs
Remarks
A simulation cannot be used when Movemaster
command is selected.
Only a CRnQ type can be displayed.
A simulation cannot be used when Movemaster
command is selected.
17-408