Jog Parameter - Mitsubishi Electric MELFA CR750 Series User Manual

11.3.2. Jog parameter

Set the speeds for joint jogging and orthogonal jogging.
Set parameters while connected to the robot controller. From the project tree, double click the target project
[Online] -> [Parameter] -> [Movement parameter] -> [Jog].
After you change the parameter value, you can rewrite the jog parameter in the robot controller by clicking the
[Write] button.
Figure 11-10 Jog parameter
You can reference explanations of displayed parameters by pressing the [Explain] button.
11-167 11-167