Rt Toolbox2 Usage; Starting Rt Toolbox2 - Mitsubishi Electric MELFA CR750 Series User Manual

2. RT ToolBox2 Usage

This explains the usage of this software simply.
2.1.

Starting RT ToolBox2

When you install this software, a shortcut is prepared on the desktop. Start RT ToolBox2 by double clicking
this short cut.
Version 1.8 or earlier Version 2.00A or later
Figure 2-1 RT ToolBox2 Shortcut
From [Start] button -> [All Programs] -> [MELSOFT], select [RT ToolBox2] and start it.
Figure 2-2 RT ToolBox2 Initial Screen
When you start RT ToolBox2, "Communications Server 2" is started up as an icon.
This Communications Server 2 has functions for connecting with a robot controller or during a simulation, a
virtual controller. Do not close Communications Server 2.
Figure 2-3 Communication Server 2
2-43 2-43