Save Data／Log Setting - Mitsubishi Electric MELFA CR750 Series User Manual

16.3.10. Save Data／Log Setting
The [Save Data] (
in time can be saved by a CSV file format.
The newest data can be written out to a log file for every interval for a definite period of time. Click the [Log
Setting] ( ) button of an oscillograph screen, and [Log file operation] dialog is displayed. The time
interval written in a log file is specified by a [Select the interval log] combo box.
Click a [Set] button and it completes a setup of a log file.
The folder of data storage / log file name, and its preservation place is as follows.
Table 16-7 Data saving file name / Log file name / Data saving folder
Item
Data saving file name
Log file name
Data saving folder
16-362
) button of an oscillograph screen can be clicked and the data acquired by the point
Figure 16-37 Log file operation
Store<time stamp>.csv
The <time stamp> shows the time which clicked the [Data save] button.
"<A.D(4chars)>< month(2chars)><day（2chars）> -
<time(2chars)><minutes（2char）><second（2chars）>"
Example：
Store20130911-183525.csv
Log<time stamp>.csv
The <time stamp> shows the time at the time of a data acquisition start.
Example：
Log20130911-183525.csv
"Workspace \ Project \ Oscillograph \ Log"
The preservation folder of the log file can be changed.
Explanation
16-362