Setting Parameters - Mitsubishi Electric MELFA CR750 Series User Manual

11. Setting Parameters

You can reference and rewrite parameter information set in a robot controller.
You can set parameters with the method of specifying parameter names and setting them or with the method
of making the settings arranged by function.
Caution
When the password is registered in "parameter" by robot controller's
security function, it is not possible to write the parameters to the robot
controller.
When the password is registered in "parameter" by robot controller's security function, it is not
possible to write the parameters to the robot controller.
Writing paraemters
Please delete the password of robot controller's security function when you operate these. Please
refer to "13.7.3 Delete the Password" for the method of deleting the password.
Even if the security function has been turned on, it is possible to read the parameters.
The setting (register the password) and the release (delete the password) of robot controller's
security function can be used with this software version 2.0 or later. Please refer to "Table 13-15
Compliant version of this function and controller" for robot controller's compliant version.
11-159
Item to which password of security function is registered.
Program Parameter
○
○ : Enable、 × : Disable
File
× ○
11-159