Mitsubishi Electric MELFA CR750 Series User Manual page 337

16.2.2.4. Program execution content
The content of the program being executed is displayed. The amount of 7 lines, the execution line, upper 3
lines and lower 3 lines, are displayed.
(1) Click the position (block) in which the content of the program is displayed (<a>). Left side of the content
of the program is arranged in this position.
(2) After "Select item" window is displayed, click [Robot information] button (<b>).
(3) Select "Exe line" (<c>) as the type on "Create robot information" window.
(4) After setting the information on the content of the program, click [OK] button (<d>).
<1>
<2>
<3>
<d>
Figure 16-9 Creating a display of the program execution content
<1> Size
<2> Slot
<3> Color
16-337
<c>
: Set the width of box in which the content of program is displayed. The value
from 1 to 16 can be set.
: Select task slot number for which the program is executed.
The range of slot number that can be set is different according to the system
that uses it.
: Select the background color of the area where the content of program is
displayed.
<b>
<a>
When User definition screen (TB) is shown
16-337