Mitsubishi Electric MELFA CR750 Series User Manual page 400

3D model (Continuation)
Caution
If 3D model of big size is read, screen drawing processing will
become heavy.
17.3.6.2. Copy of the object
The object of the layout can be copied. After selecting the object, click [Copy] button. With the software version
1.7 or later, similar operation can be done by right-click.
It is possible to copy the whole group in this software version 2.20W or later.
17.3.6.3. Delete of the object
The object of the layout can be deleted. After selecting the objects, click [Delete] button. Click [Yes] button
after the confirming message is displayed. With the software version 1.7 or later, similar operation can be done
by right-click.
It is possible to delete the whole group in this software version 2.20W or later.
That once the objects are deleted, they cannot be recovered.
17-400
Window Explanation
The unit of scale that display in 3D monitor can be
specified with Version 3.00A or later of this software.
The millimeter is standard unit in 3D monitor.
The unit of scale that can be specified is as
follows.
- Millimeter[mm]
- Meter[m]
- Inch[in]
- Magnification specification (Magnification of
1.0-10000.0 can be specified.)
17-400