Load Data; Save Image; Gray Scale; Reflected To 3D Monitor - Mitsubishi Electric MELFA CR750 Series User Manual
Hide thumbs
Also See for MELFA CR750 Series:
- Instruction manual (159 pages) ,
- Manual (2 pages) ,
- Ethernet function instruction manual (146 pages)
Table of Contents
Advertisement
When you select the [Real time monitor] of the [Select the interval to log] drop-down list, you can save
all the data acquired in real time monitor to the log file. If the data is more than 50 million cases (about 1 hour),
it will be saved to a new time stamp log file.
[Real time monitor] can be used with Version 3.50C or later of this software.
Caution
If you select the [Real time monitor] in [Select the interval to log]
・Please cancel the power saving settings of the personal computer.
・When the disk capacity is less than or equal to 500M bytes, it will stop the file save.
If you are using a low-performance PC
・There is a case in which data can not be saved in 7.1msec interval.
・High-speed communication and to file writing taken the CPU power, you may not be able to
operate on the screen.
disconnecting the communication cable of the robot. You will be able to operate.
If such can not be the operation of the screen, please select the save interval in 100msec or more.
16.3.11.
Load Data
The data file and log file which were saved in "エラー! 参照元が見つかりません。 エラー! 参照元が見つかり
ません。" can click The [Load Data] (
16.3.12.
Save Image
The [Save Image] (
can be saved in bitmap image
The image file name and the image saving folder name are as follows.
Item
Image file name
Image saving folder
16.3.13.
Gray scale
When the check box of the gray display is turned on, the graph is displayed by the gray scale.
This function can be used with Version 3.01B or later of this software.
16.3.14.
Reflected to 3D monitor
When the [Reflect to 3D monitor] check box is turned on, you can reflect the joint position(FB) or joint
position(CMD) which you acquired from the robot to the 3D monitor.
This function can be used with Version 3.50C or later of this software.
16-363
Please shut off the communication with the robot such cases by, for example
) button of an oscillograph screen and can display it on the graph.
) button of an oscillograph screen can be clicked and the graph currently displayed
Table 16-8 image filename & Image saving folder
Img<time stamp>.bmp
The <time stamp> shows the time which clicked the [Image save] button.
Example：
Img20130911-183525.csv
"Workspace \ Project \ Oscillograph \ Image"
Explanation
16-363
Advertisement
Table of Contents
